HYTE Y70 TOUCH INFINITE Dual Chamber Mid-Tower E-ATX PANDA (WHITE-BLACK)

This mid-tower case is ready to bring the cool. Featuring a perforated front and top panel, alongside widened channels, hooks, straps, and toolless entry, this sleek case will keep any build cool and comfortable while offering plenty of space. Perforated front & top panels enable maximum thermal performance Intuitive cable management system with wide channels, hooks, & straps Tool-less access to front & side panels (tinted panels on black variant only) Front & top support radiators up to 360mm Includes two F Series Quiet 120mm Fans Supports vertical GPU mounting (Sold Separately) Three color options (Matte Black, Matte White, White & Black) Two top-mounted USB 3.2 Type-A ports One top-mounted USB 3.2 Type-C port

The DeepCool CG560 Mid-Tower Case combines abundant airflow and generous cooling capacity in an updated modern design that makes system building a breeze with four pre-installed fans.

Features: Mid-tower chassis configurable for air cooling and water cooling Airflow optimized front, top and PSU shroud side mesh panels Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fan Supports 360 radiator at the top, front and a maximum of 10 fans Includes rear PCIe fan bracket Front I/O that can be relocated to the bottom Extensive cable management solution AIRFLOW FOCUS The LANCOOL 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative rear PCIe fan bracket to maximize airflow. CONTINUOUS FRONT TO TOP MESH To ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud’s side. The front mesh extends to the top for a continuous mesh panel. LANCOOL 216 RGB FANS The included 160mm ARGB fans feature two channels of LEDs (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3pin header. Located in the second chamber behind the motherboard, a SATA-powered fan hub can support up to 4x ARGB and PWM fans. AIR COOLING MODE / WATER COOLING MODE The modular motherboard I/O allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems. WATER COOLING Set lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water cooling. FRONT I/O CAN BE RELOCATED Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel. HARDWARE COMPATIBILITY The LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected. LATEST GEN. GPU READY With enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the LANCOOL 216 is compatible with even the largest NVIDIA 4000 series cards. PRESSURE LEAK FREE Pre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator/3x120mm fans at the top. REMOVEABLE TOP RADIATOR BRACKET The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. PCIE FAN BRACKET The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system. VERTICAL GPU COMPATIBLE The PCIe expansion slot panel can be rotated to vertically install the GPUs, only an additional riser cable is required. CABLE MANAGEMENT The LANCOOL 216 offers multiple options for easy cable management. Along the cable grommet bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for cleanly routing the CPU 8pin cable, and 2 additional velcro straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber. DUST FILTER For users who take dust management to the next level, a magnetic front panel dust filter is available as an optional accessory. The dust filter fits perfectly between the front panel and the front fans. PCIE CABLE For vertical GPU mounting, only an additional riser cable is required. With a PCB that has a hole spacing of 112.7mm, the Lian-Li PCIe 4.0 X16 RISER CABLE is compatible with the LANCOOL 216.

ROG Strix Helios ROG Strix Helios RGB ATX/EATX mid-tower gaming case with tempered glass, aluminum frame, GPU braces, 420mm radiator support and Aura Sync Premium design & aesthetics: Made for showcase builds with three tempered-glass panels, brushed-aluminum frame and integrated Aura Sync RGB front lighting Clean build made easy: A multifunction cover with graphics card holders, a PSU shroud and a translucent rear cable cover offer effortless cable management Versatile GPU mounting: Install three graphics cards in standard orientation, or two vertically for extra showcase flair using a bundled bracket Ready for serious cooling: Supports an up to EATX motherboard, with room for 420mm front radiators and water-cooling pump and reservoir Advanced I/O panel: USB 3.1 Gen 2 Type-C™ port, four USB 3.0 ports, an RGB-lighting control button and a fan-speed control button Comfortable case handles: Easily carry your prized build to LAN parties with ergonomic and stylish fabric handles

The H9 Flow is designed to cool off powerful GPUs with its expansive thermal capabilities, featuring the capacity for ten fans and numerous 360mm radiator mounting options and the perforated top panel takes cooling even further. Unique uninterrupted glass panel for a clear view of the interior Intuitive cable management and dual chamber design Room for ten fans or three 360mm Radiators Perforated top panel for enhanced cooling Direct airflow to the GPU for handling high-powered components Enhanced experience with other products from the NZXT ecosystem Includes four F Series 120mm Quiet Airflow fans