Description
Lian Li Lancool III RGB MID TOWER BLACK (E-ATX)
- Open the left and right side tempered glass panels by the aluminum door handles.
- The top, front, and bottom of the case can each fit a 360mm radiator.
- The design of the storage trays has been revised to include modularity. Each unused HDD/SSD tray can be individually
removed.
- New cable management design: I.) 2 x Magnetic hinged back side cable covers, easier to open and still removable for unrestricted access. II.) 3+5 velcro channel straps : 4 small straps help route the CPU and fan cables, and another small one for shorter 24 pin cables, while 3 large ones are for the remainder of the cables. III.) Sliding front side cable cover (also can mount distro plate) By loosening a screw behind the motherboard tray, the bar can slide to adapt for wider motherboards and let the user customize the curve of their cables passing through.
Lancool III RGB includes 3 x 140 ARGB fans at the front and 1 x 140 PWM fan at the rear
Exterior design
Lancool III has a fine mesh top, front and lower sides panels. Opening the left and right tempered glass panels is easy with the front aluminum door handles.
3 x 360 Radiator
In the main chamber, the top, front, and bottom of the case can each fit a 360mm radiator.
Upgrade Cable management
Improved cable management includes the magnetic hinged rear cable covers, which are easier to open and removable for full access.
Eight velcro-channel straps are located in key points, with 4 around the rear CPU cutout for cable routing, a small one at the bottom for short 24-pin cables, and 3 large dual-layer straps are at the front.
| PRODUCT NAME |
LANCOOL III |
| ODEL |
LANCOOL 3-X BLACK |
| COLOR |
Black |
| DIMENSION |
(D) 526mm x (W) 238mm x (H) 523mm |
| MOTHERBOARD |
E-ATX (width: under 280mm)/ATX/MICRO-ATX/MINI-ITX |
| PSU CLEARANCE |
ATX (Under 220mm) |
| MATERIALS |
Aluminum (Door handles)
0.8mm SGCC (exterior and interior)
4.0mm tempered glass (both sides) |
| INCLUDED FANS |
Front: 3 x 140mm PWM fans
(200~1800 RPM / DC 12 V, 0.24A / 83.5 CFM / 2.3 mm H2O / 33dB-A)
Rear: 1x 140mm PWM fan
(200~1800 RPM / DC 12 V, 0.24A / 83.5 CFM / 2.3 mm H2O / 33dB-A) |
| FAN SUPPORT |
Front (multi-way fan/radiator bracket): 3 x 120mm or 3 x 140mm
Top: 3 x 120 or 3 x 140mm
Rear: 1 x 120mm or 140mm
Above PSU Chamber: 3 x 120mm |
| RADIATOR SUPPORT |
Front: 360mm or 420mm
Top: 360mm or 420mm
Above PSU Chamber: 360mm |
| GPU LENGTH CLEARANCE |
435mm (Max) |
| CPU HEIGHT CLEARANCE |
187mm (Max) |
| STORAGE |
Behind MB tray: 2 x 2.5″ SSD
Behind right side PSU shroud panel: 3 x 2.5’’ SSD
Hard drive cage: 4 x 3.5″ HDD/2.5″ SSD
Above PSU chamber: 3 x 2.5″ SSD |
| EXPANSION SLOT |
8 |
| IO PORTS |
1 x Power Button
1 x Reset Button
2 x USB 3.0
1 x USB Type C
1 x Audio |
| DUST FILTERS |
1 x Bottom (Tray) |
| WARRANTY |
1 year |
Kartik
LIan LI Lancool III The case is all you can ask for to meet your needs. There is room to work and get everything into place. The air flow is good and the fans are not any louder than previous builds when at full load. There are only two minor flaws. 1) the inside hinge pin on the top back is facing down instead of up. The door still closes with no issues. 2) The RGB is connected to the motherboard, however, for the life of me I am not able to get the colors to sync. They go with the beat of the music with no problem though.